Datalogic Heron HD3130-WH - LED and Beeper Indications

LED and Beeper Indications
14 Heron™ HD3130
LED and Beeper Indications
The imager’s beeper sounds and its illumination flashes or changes
color to indicate various functions or errors on the reader. A “Green
Spot” also lights to indicate a good read. The tables below list these
indications. Reference the PRG for a more detailed list.
Item Description
Mechanical Features
Weight
(without cable)
approx. 150 g (5.3 oz)
Cable Length Refer to www.datalogic.com
Decode Capability
UPC/EAN, P2 /P5 add-ons; ISBN; ISSN; GTIN, add on
2/5; Codabar; ABC Codabar; Interleaved 2/5; Code 93;
Code 128; Code 39; Code 32 (Italian Pharmacode); Code
11; Plessey; Industrial 2/5; IATA Industrial 2/5; EAN
128; Code 4; Code 5; China Post (Datalogic 2 of 5);
Standard 2 of 5; MSI; Concatenated ISBT 128
STACKED CODES: GS1 DataBar Expanded; GS1 DataBar
Limited; GS1 DataBar Omnidirectional
Indication LED Beeper
Power-up
Upper LED flashes/blinks on
power-up, however, this may
be too rapid to view. With a
USB interface, the LED blinks
until enumeration with the
host is completed.
Imager beeps four times at
highest frequency and vol-
ume upon power-up.
Good Read
Upper green LED comes on for
programmed time (default).
LED behavior for this indica-
tion is configurable using
Aladdin utility.
One beep at current fre-
quency, volume, mono/bi-
tonal setting upon a suc-
cessful label scan. It is also
possible to upload custom
jingles with Aladdin.
ROM Failure 200ms on / 200ms off
Imager sounds one error
beep at highest volume for
200 mS.
Limited Scanning
Label Read
N/A
Imager 'chirps' six times at
the highest frequency and
current volume.
Imager Disabled
The LED blinks continuously
100mS on / 900 mS off
N/A