Operating Modes
Quick Reference Guide 25
Pick Mode
Specifies the ability of the reader to decode labels only when they are
close to the center of the aiming pattern, which is the area indicated by
the two blue arrows. Pick Mode is a Decoding and Transmission process
where bar codes that are not within the configurable distance from the
center of the aiming pattern are not acknowledged or transmitted to the
host. It is active only while the scanner is in Trigger Single mode. If the
scanner switches to a different Read Mode, Pick Mode is automatically
disabled.
Multiple Label Reading
The reader offers a number of options for multiple label reading. See the
PRG or software configuration tool for descriptions of these features
and programming labels.
NOTE
This feature is not compatible with Multiple Labels Reading
in a Volume. See the PRG for more information.
PICK MODE
ENTER/EXIT PROGRAMMING MODE
PIck Mode = Disable
Pick Mode = Enable
To Next Page
Loading...
