Symbology Selection Enter/Exit Programming Mode
Product Reference Guide
215
Maxicode Set Length 2
This feature specifies one of the bar code lengths for Maxicode Length Control
on page 214. Length 2 is the maximum label length if in Variable Length Mode,
or the second fixed length if in Fixed Leng
th Mode. Characters can be set from
0001 to 0145 characters in increments of 0001 (pad with zeroes).
See page 262 for detailed instructions on setting this feature.
Select Maxicode Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followe
d by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save
the entry string. You can then start again at the
beginning.
CANCEL
Length 2 is 0145 Characters
To Next Page
Loading...
