Datalogic Heron HD3430 - Standard Cable Pinouts

Standard Cable Pinouts
Product Reference Guide 269
Standard Cable Pinouts
Figure 8 and Table 24 provide standard pinout information for the scanner’s
cable.
Figure 8. Standard Cable Pinouts
The signal descriptions in Table 24 apply to the connector on the scanner and
are for reference only.
Table 24. Standard Cable Pinouts — Scanner Side
Pin RS-232 USB
Keyboard
Wedge
1 RTS (out)
2 D+ CLKIN (KBD side)
3 D- DATAIN (KBD side)
4 GND GND GND
5 RX
6 TX
7 VCC VCC VCC
8 CLKOUT (PC side)
9
DATAOUT (PC
side
)
10 CTS (in)
Cable Clip (Latch)
To Host
Cable
Cable Strain Relief
Interface Cable Port
Pin 1
Pin 10