DEVICE MAINTENANCE
104
SAFERY LASER SCANNER
• carrying out the activities under your accountability in a proper way and in compli-
ance with the instructions provided herein;
• main
taining the safe operation of the product and the environment in which it is
installed;
• abiding
by all regulations and directives for labor protection and safety at work;
• r
egularly having the product tested and calibrated by competent persons, who
shall report any anomalies and track the performance of the product in written
records, which shall be sent to Datalogic.
BY REPLACING THE OPTICAL WINDOW, YOU DECLARE TO ACKNOWLEDGE AND ACCEPT
T
HE POTENTIAL RISKS AND LIABILITIES ARISING FROM THE WINDOW REPLACEMENT
PROCEDURE, AS WELL AS FROM FAILURE TO COMPLY WITH THE INSTRUCTIONS PRO-
VIDED BY DATALOGIC IN THIS RESPECT. TO THE FULLEST EXTENT PERMITTED BY LAW,
D
ATALOGIC (AND ITS DIRECTORS, OFFICERS, AFFILIATES) SHALL NOT BE HELD LIABLE FOR
ANY DAMAGES (DIRECT, INDIRECT, OR CONSEQUENTIAL) WHICH MIGHT OCCUR TO YOU
AND ANY THIRD PARTIES AS A CONSEQUENCE OF THE WINDOW REPLACEMENT PROCE-
DURE PERFORMED BY YOU OR Y
OUR QUALIFIED PERSONNEL.
Prerequisites for Window Replacement
NOTE
Clean environment
Avoid the window replacement on field. The optical win-
dow must be replaced in a controlled, pollution-reduced
envir
onment.
Non-condensing
environement
The environment where the window replacement is per-
formed must have a temperature of 18 – 30 °C and a non-
conden
sing humidity (preferably < 80%).
Free area
A 2-meter free area around the 275° angle range of the
Laser Scanner is necessary to calibrate and validate the
new optical window.
Visual inspection
A visual inspection is needed before replacement to estab-
lish whether the optical windo
w can be replaced or the
whole device needs replacing instead.
Use of dedicated tools
To perform the window replacement procedure a 2.5 mm
hex key is necessary, preferably with adjustable torque
driver.
Skilled, authorized personnel
The replacement of the optical window must be performed
by skilled, authorized personnel only.
To perform the window replacement procedure, the following prerequisites
must be strictly observed:
To Next Page
Loading...
