Datalogic Magellan 1500i - Number of Data Bits; Number of Stop Bits

ENTER/EXIT PROGRAMMING MODE
92 MAGELLAN™ 1500I
RS-232 Number of Data Bits
Specifies number of data bits required for sending and receiving data.
NOTE
A setting of 7 data bits with no parity will default to 8 data bits and no
parity.
.
009B00(CR)
RS-232 Number of Data Bits = 7
009B01(CR)
RS-232 Number of Data Bits = 8
RS-232 Number of Stop Bits
Specifies number of stop bits required for sending and receiving data
002200(CR)
RS-232 Number of Stop Bits = 1
002201(CR)
RS-232 Number of Stop Bits = 2
DEFAULT
DEFAULT