Datalogic Magellan 1500i - Beep on ASCII BEL; Beep on Not on File

RS-232 INTERFACE FEATURES ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 97
RS-232 Beep on ASCII BEL
Enables/disables ability of scanner to beep (sound a good read tone) on receiving an ASCII
BEL (07 hex).
069D00(CR)
RS-232 Beep on ASCII BEL = Disable
069D01(CR)
RS-232 Beep on ASCII BEL = Enable
Beep on Not on File
Select for the host to beep (or not) when a not‐on‐file condition is detected by the host.
045100(CR)
RS-232 Beep on Not on File = Muted
045101(CR)
RS-232 Beep on Not on File = Low Volume
045102(CR)
RS-232 Beep on Not on File = Medium Volume
045103(CR)
RS-232 Beep on Not on File = High Volume
DEFAULT
DEFAULT