PRODUCT REFERENCE GUIDE
125
CONFIGURATION |
1D SYMBOLOGY PROGRAMMING
1D SYMBOLOGIES
NOTE
If the scanner’s interface type must be changed, always be sure that interface con-
figuration is the FIRST item scanned during a
programming session. (Selecting an
interface type resets ALL other configuration items — including symbology pro-
gramming — to the factory default for that interface type.)
The following pages contain configuration information concerning the various barcode
types (symbologies) the scanner supports.
COUPON CONTROL starting on page 126
starting on page 129
starting on page 134
starting on page 140
starting on page 145
OTHER UPC/EAN OPTIONS starting on page 157
starting on page 178
GS1 DATABAR starting on page 179
DATABAR OMNIDIRECTIONAL starting on page 179
DATABAR LIMITED starting on page 184
DATABAR EXPANDED starting on page 188
CODE 39 starting on page 196
CODE 32 ITALIAN PHARMACODE starting on page 207
CODE 128 starting on page 210
starting on page 218
INTERLEAVED 2 OF 5 (I 2 OF 5) starting on page 219
CODABAR starting on page 226
CODE 93 starting on page 237
starting on page 242
STANDARD 2 OF 5 starting on page 250
SECTION CONTENTS
UPC-A
UPC-E
EAN-13
EAN-8
GTIN
EAN-128
MSI
To Next Page
Loading...
