Datalogic Magellan 1500i - Expand UPC-A to EAN-13

UPC-A ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 133
Expand UPC-A to EAN-13
Enables/disables expansion of UPC‐A labels to EAN/JAN‐13.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
004300(CR)
Expand UPC-A to EAN-13 = Disable
004301(CR)
Expand UPC-A to EAN-13 = Enable
DEFAULT