Datalogic Magellan 1500i - Databar Omnidirectional;Ean-128 Emulation

ENTER/EXIT PROGRAMMING MODE
180 MAGELLAN™ 1500I
DataBar Omnidirectional/EAN-128 Emulation
Enables/disables the ability of DataBar Omnidirectional to be transmitted as EAN‐128.
1. To set this feature:
2. Scan the Enter/Exit Programming Mode barcode at the top of the page.
3. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar
code.
04D400(CR)
DataBar Omnidirectional/EAN-128 Emulation =
Disable
04D401(CR)
DataBar Omnidirectional/EAN-128 Emulation = Enable
DEFAULT