Datalogic Magellan 1500i - Databar Expanded Length 1

DATABAR EXPANDED ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 193
DataBar Expanded Length 1
Length 1 is the minimum label length if in variable length mode, or the first fixed length if in
fixed length mode. Length includes the barcode's data characters only.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode,
Set DataBar Expanded Length 1 on page 193 below. You’ll need to
cover any unused barcodes on this and the facing page to ensure that the scanner
r
eads only the barcode you intend to scan.
3. Scan the appropriate digits from the
Alpha-Numeric Keypad in Appendix C that repre‐
sent the desired label length. The selectable range for this option is 00 to 74. Pad all
single digit
numbers with a leading zero to yield a two‐digit entry (00‐74).
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar
code.
04BE(CR)
Set DataBar Expanded Length 1
Default setting for this feature = 01
DEFAULT