ENTER/EXIT PROGRAMMING MODE
200
MAGELLAN™ 1500I
Code 39 Full ASCII
Enables/disables the ability of the scanner to translate to Code 39 full ASCII labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar
code.
Code 39 Full ASCII = Disable
Code 39 Full ASCII = Enable
DEFAULT
To Next Page
Loading...
