Datalogic Magellan 1500i - Code 32 Italian Pharmacode; Code 32 Italian Pharmacode Enable

CODE 32 ITALIAN PHARMACODE ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 207
CODE 32 ITALIAN PHARMACODE
Code 32 Italian Pharmacode Enable
Enables/disables the ability of the scanner to decode Italian Pharmaceutical Code 39 labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar
code.
00EE00(CR)
Code 32 Italian Pharmacode Enable = Disable
00EE01(CR)
Code 32 Italian Pharmacode Enable = Enable
DEFAULT