CODE 32 ITALIAN PHARMACODE ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
209
Code 32 Check Character Transmission
Enables/disables transmission of Code 32 check character.
NOTE
This item is ignored when the advanced feature, Full Label Edit,
is enabled.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar
code.
Code 32 Check Character Transmission = Disable
Code 32 Check Character Transmission = Enable
DEFAULT
To Next Page
Loading...
