Datalogic Magellan 1500i - 218; EAN-128 Enable

ENTER/EXIT PROGRAMMING MODE
218 MAGELLAN™ 1500I
EAN-128
EAN-128 Enable
Enables/disables the ability of the scanner to translate EAN128 labels to the EAN128 data
format.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar
code.
02D800(CR)
EAN-128 = Transmit EAN128 labels in Code128 data
format
02D801(CR)
EAN-128 = Transmit EAN128 labels in EAN128 data for-
mat
DEFAULT