MSI ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
247
MSI Length Control
This feature specifies whether variable‐length or fixed‐length decoding will be set for MSI.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar
code.
MSI Length Control = Variable Length
MSI Length Control = Fixed Length
DEFAULT
To Next Page
Loading...
