Datalogic Magellan 1500i - MSI Length 1

ENTER/EXIT PROGRAMMING MODE
248 MAGELLAN™ 1500I
MSI Length 1
If MSI Length Control is set to Fixed‐Length decoding, this feature specifies MSI first fixed
length. If MSI Length Control is set to Variable‐Length decoding, this feature specifies the
minimum label length.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode,
Set MSI Length 1 on page 248 below. You’ll need to cover any
unused barcodes on this and the facing page to ensure that the scanner reads only
the
barcode you intend to scan.
3. Scan the appropriate digits from the
Alpha-Numeric Keypad in Appendix C that repre‐
sent the desired label length. The selectable range for this option is 4 to 16. Pad all
single digit
numbers with a leading zero to yield a two‐digit entry (04‐16).
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar
code.
00CB(CR)
Set MSI Length 1
Default setting for this feature = 04
DEFAULT