PRODUCT REFERENCE GUIDE
17
CHAPTER 2
PROGRAMMING
ABOUT PROGRAMMING YOUR SCANNER
This PRG lists the master defaults for the Magellan 1500i. These master defaults can be
modified depending on the configuration file loaded into the scanner at the time of manu‐
facture. This allows the user to customize
and adapt the scanner performance for their
changing needs. Specific configuration settings are also optimized for the active host inter‐
face. Datalogic Technical Support can assist with creating custom configurations.
The scanner is typically factory‐c
onfigured with a set of default features standard to the
interface type you ordered. The scanner’s programmable feature settings can be modified
to accommodate your system’s unique requirements.
If you need to change these settings, custom programming can be accomplished using one
of the f
ollowing methods:
Programming Barcodes:
The programming bar code labels contained in this manual will
allow you to customize and configure features and settings for your scanner. Go to "
Pro-
gramming with Barcodes" on page 18 to get started.
Scanalyzer Configuration Utility:
An additional programming option is to use Datalogic’s
Scanalyzer software configuration utility, available for free download from the Datalogic
website. See "
Datalogic Scanalyzer" on page 22 for more information.
NOTE
When you program the scanner using either of the methods listed above, the scanner
will store the changes until reprogrammed or returned to factory defaults.
To Next Page
Loading...
