Datalogic Magellan 1500i - PDF 417 Read Option

ENTER/EXIT PROGRAMMING MODE
266 MAGELLAN™ 1500I
PDF 417 Read Option
This feature specifies an additional read control option for PDF 417 barcodes.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
05A400(CR)
PDF 417 Read Option = None
05A401(CR)
PDF 417 Read Option = Turn Off Codeword
Length Checking
DEFAULT