Datalogic Magellan 1500i - Micro PDF 417; Micro PDF 417 Enable

MICRO PDF 417 ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 267
MICRO PDF 417
Micro PDF 417 Enable
Enables/disables the ability of the scanner to decode Micro PDF 417 labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
034E00(CR)
Micro PDF 417 = Disable
034E01(CR)
Micro PDF 417 = Enable
DEFAULT