Datalogic Magellan 1500i - Micro QR Code; Micro QR Code Enable

ENTER/EXIT PROGRAMMING MODE
276 MAGELLAN™ 1500I
MICRO QR CODE
Micro QR Code Enable
Enables/disables the ability of the scanner to decode Micro QRCode labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
042800(CR)
Micro QR Code = Disable
042801(CR)
Micro QR Code = Enable
DEFAULT