Datalogic Magellan 1500i - Kix; Kix Enable

ENTER/EXIT PROGRAMMING MODE
286 MAGELLAN™ 1500I
KIX
Kix Enable
Enables/disables the ability of the scanner to decode Kix labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
052400(CR)
Kix = Disable
052401(CR)
Kix = Enable
DEFAULT