Datalogic Magellan 1500i - Imb; IMB Enable

IMB ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 289
IMB
IMB Enable
Enables/disables the ability of the scanner to decode IMB labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
052700(CR)
IMB = Disable
052701(CR)
IMB = Enable
DEFAULT