Datalogic Magellan 1500i - Portugal Post; Portugal Post Enable

PORTUGAL POST ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 291
PORTUGAL POST
Portugal Post Enable
Enables/disables the ability of the scanner to decode Portugal Post labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
052900(CR)
Portugal Post = Disable
052901(CR)
Portugal Post = Enable
DEFAULT