Datalogic Magellan 1500i - Digital Watermark (Digimarc) Data Format

ENTER/EXIT PROGRAMMING MODE
30 MAGELLAN™ 1500I
Digital Watermark (Digimarc) Data Format
Selects the format for the watermark data. Choices are:
• Compatibility mode
• Databar‐14
• Native
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
NOTE
049200(CR)
Digital Watermark (Digimarc) Data Format = Compati-
bility mode
049201(CR)
Digital Watermark (Digimarc) Data Format = Databar-14
mode
049202(CR)
Digital Watermark (Digimarc) Data Format = Native
mode
The Digital Watermark feature must be enabled for decode functionality.
DEFAULT