Datalogic Magellan 1500i - Accelerometer Reject Threshold

ENTER/EXIT PROGRAMMING MODE
38 MAGELLAN™ 1500I
Accelerometer Reject Threshold
Sets acceleration threshold above which data from the accelerometer will be rejected.
NOTE
Setting this feature to LOWEST while the Detect Threshold (
page 37) is set to
HIGHEST will result in the scanner rejecting all motion inputs.
Accelerometer Reject Threshold = Lowest
Accelerometer Reject Threshold = Low
Accelerometer Reject Threshold = Medium
Accelerometer Reject Threshold = High
Accelerometer Reject Threshold = Highest
150700(CR)
150701(CR)
DEFAULT
150702(CR)
150703(CR)
150704(CR)