IMAGING FEATURES ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
69
Region of Interest (ROI)
This feature specifies the X‐Y coordinates for the Region of Interest (ROI). The region of
interest coordinates are defined as follows:
Where xmax is the x-size of a full size image (1279
pixels), and ymax is the y-size of a full size image
(1023 pixels).
For example, a coordinate set of 0, 639, 512, 1023
wi
ll produce the bottom left section of a full size
image.
NOTE
Picture coordinates are NOT defined on a Cartesian coordinate plane.
•Byte [0]‐[1]: 16
bit hex value xmin
•Byte [2]‐[3]: 16
bit hex value xmax
•Byte [4]‐[5]: 16
bit hex value ymin
•Byte [6]‐[7]: 16
bit hex value ymax
NOTE
If the xmax/ymax values are configured larger than the maximum values
above, they will default to 1 less than their respective maximum values.
If the xmin/ymin values are configured l
arger than xmax/ymax, they will
default to 0.
Images extracted with ROI must be in JPG format.
To Next Page
Loading...
