Datalogic Magellan 1500i - Cell Phone Settings; Cell Phone Mode

ENTER/EXIT PROGRAMMING MODE
72 MAGELLAN™ 1500I
CELL PHONE SETTINGS
Cell Phone Mode
Enables/disables the operating mode for mobile phone read.
• In Toggle mode each host command toggles the mode.
• In Timer Expiration mode, a single host command enters Cell Phone mode but it is
exited at timer expiration. The timer is not restarted on a label read.
• In Always On mode, the scanner stays on regardless of host command or button push.
It will not enter sleep mode.
Cell Phone Mode = Toggle
Cell Phone Mode = Timer Expiration
Cell Phone Mode = Always On
046700(CR)
046701(CR)
DEFAULT
046702(CR)