Datalogic Magellan 1500i - Cell Mode Percent

CELL PHONE SETTINGS ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 73
Cell Mode Percent
Specifies the rate of frames dedicated to reading cell phones. Cell reading feature must be
enabled for this to be active. The setting reflects a variable setting (or percentage) of
frames dedicated to cell reading
NOTE
047100(CR)
Cell Mode Percent = 2.5% (Very Low)
047101\r
Cell Mode Percent = 5% (Low)
047102\r
Cell Mode Percent = 10% (Medium)
047103\r
Cell Mode Percent = 20% (Medium High)
047104\r
Cell Mode Percent = 50% (High)
As the percentage is increased, object sense (if enabled) will become less
responsive. Anything above 10% will have a negative impact on scanning
performance.
DEFAULT