PRODUCT REFERENCE GUIDE
75
INTERFACE SELECTION
INTERFACE TYPE
Specifies the current scanner interface.
NOTE
NOTE
NOTE
When an interface is selected, the scanner loads the configuration for that
interface as the selection is made. Any custom configurations done in the
previous interface will not be carried over to the configuration for the new
interface.
Great care should be taken to select
the correct interface type, since you
can cause damage to the scanner and/or POS terminal by attempting to
change to an incompatible interface. ALWAYS make interface selections
with the host cable DISCONNECTED.
If the scanner’s interface type must be changed, always be sure that inter-
face configuration is the FIRST item sc
anned during a programming ses-
sion. (Selecting an interface type resets AL
L other configuration items to
the factory default for that interface type.)
The correct interface cable is generally included for the reader interface
type y
ou ordered.
CAUTION
To Next Page
Loading...
