Datalogic MAGELLAN 3410VSi - Scanning Barcodes Guide; Scanner Button Operation

QUICK REFERENCE GUIDE 11
HOW TO SCAN
Bar codes can be presented to the scanner’s window or pushed past it
using a “sweep” technique. The scanner can also be programmed to ini-
tiate a scan of a cell phone or other LCD bar code object, or an image capture
upon pushing the Camera Button.
Scanner Button
The Scanner Button performs multiple functions, depending on how
long it is pressed:
NOTE: Volume changes made using the Scanner Button are
lost when the scanner is powered down and are reset to the
configured setting. If you wish to permanently change the
volume, use the programming labels in the Product
Reference Guide.
PRESS
DURATION
FUNCTION COMMENT
Momentary (when
scanner is asleep)
Wakes scanner from
Sleep Mode
Alternatively, the scanner can
be awakened by:
- Moving an object through the
scan zone.
- Scanning with an attached
auxiliary scanner.
Product
Scan Window
Bar
code
Scan Window
S
W
E
E
P
I
N
G
M
O
T
I
O
N
P
R
E
S
E
N
T
A
T
I
O
N
M
O
T
I
O
N
Bar
code
Product