Datalogic Magellan 3450VSi - AIM ID

USB Keyboard Features Enter/Exit Programming Mode
Product Reference Guide 91
USB Keyboard Caps Lock State
This feature specifies the format in which the scanner sends character data.
Selections are:
Caps Lock OFF — Send character data in normal format
Caps Lock ON — Send character data in reverse case
Shift Lock Mode — This setting results in a Caps Lock OFF functionality.
Caps Lock Compensation Mode — This only applies to USB Keyboard. For other
interfaces, this setting results in a Caps Lock OFF functionality.
To set this feature:
1. Scan the Enter/Exit Progr
amming Mode bar code.
2. Scan the desired sele
ction from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the scan-
ner reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
030400(CR)
USB Keyboard Caps Lock State =
Caps Lock OFF
030401(CR)
USB Keyboard Caps Lock State =
Caps Lock ON
030402(CR)
USB Keyboard Caps Lock State =
Shift Lock Mode
030403(CR)
USB Keyboard Caps Lock State =
Caps Lock Compensation