Datalogic Magellan 3450VSi - UPC-A Check Character Transmission

Enter/Exit Programming Mode UPC-A Check Character Transmission
118 Magellan™ 3450VSi
UPC-A Check Character Transmission
Enables/disables transmission of a UPC-A check character.
NOTE
This item is ignored when the advanced feature, Full Label Edit, is
en
abled.
To set this feature:
1. Scan the Enter/Exit Programming
Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
00B700(CR)
UPC-A Check Character Transmission = Disable
00B701(CR)
UPC-A Check Character Transmission = Enable
DEFAULT