Manual Conventions
Product Reference Guide 3
USB Connection — Connect the scanner to a USB port on the terminal/PC using
the correct USB cable for the interface type you ordered. Reference Figure 1 on
page 2.
NOTE
USB installations may require a power connection via an approved
A/C Adapter as shown in
Figure 1. For example, this would be the
case if the scanner is connected along with a number of other
devic
es to a non-powered USB hub.
Figure 2. Scanner Features - Front View
Scanner Button
Camera
Button
Scan
Cable Connector Cover
Window
Good Read Lamp
Figure 3. Scanner Features - Back View
Cable Routing
Area
Seri
al Number Label
Regulatory
USB MicroB/
MicroSD Card Port
Label
To Next Page
Loading...
