Datalogic Magellan 3450VSi - Expand UPC-E to UPC-A

Enter/Exit Programming Mode Expand UPC-E to UPC-A
124 Magellan™ 3450VSi
Expand UPC-E to UPC-A
Enables/disables expansion of UPC-E labels to UPC-A.
To set this feature:
1. Scan the Enter/Exit Programming
Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
004100(CR)
Expand UPC-E to UPC-A = Disable
004101(CR)
Expand UPC-E to UPC-A = Enable