Expand UPC-E to EAN-13 Enter/Exit Programming Mode
Product Reference Guide
125
Expand UPC-E to EAN-13
Enables/disables expansion of UPC-E labels to EAN/JAN-13.
To set this feature:
1. Scan the Enter/Exit Progr
amming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
Expand UPC-E to EAN-13 = Disable
Expand UPC-E to EAN-13 = Enable
To Next Page
Loading...
