Datalogic Magellan 3450VSi - EAN-13 First Character Transmission

Enter/Exit Programming Mode EAN-13 First Character Transmission
128 Magellan™ 3450VSi
EAN-13 First Character Transmission
Enables/disables transmission of EAN/JAN-13 first character.
NOTE
This item is ignored when the advanced feature, Full Label Edit, is
en
abled.
To set this feature:
1. Scan the Enter/Exit Programming
Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
024400(CR)
EAN-13 First Character Transmission = Disable
024401(CR)
EAN-13 First Character Transmission = Enable
DEFAULT