Datalogic Magellan 3450VSi - EAN-8 Minimum Read

EAN-8 Minimum Read Enter/Exit Programming Mode
Product Reference Guide 135
EAN-8 Minimum Read
This feature specifies the minimum number of consecutive EAN-8 decodes
before is accepted as good read.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and
the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
006501(CR)
EAN-8 Minimum Read = 1
006502(CR)
EAN-8 Minimum Read = 2
006503(CR)
EAN-8 Minimum Read = 3
006504(CR)
EAN-8 Minimum Read = 4