Datalogic Magellan 3450VSi - UPC;EAN Guard Insertion

UPC/EAN Guard Insertion Enter/Exit Programming Mode
Product Reference Guide 147
UPC/EAN Guard Insertion
This setting enables the insertion of either a missing leading or trailing guard
to a scanned bar code.
To set this feature:
1. Scan the Enter/Exit Progr
amming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
054000(CR)
UPC/EAN Guard Insertion = Disable
054001(CR)
UPC/EAN Guard Insertion = Enable