Datalogic Magellan 3450VSi - GS1 Databar; Databar Omnidirectional; Databar Omnidirectional Enable

Enter/Exit Programming Mode DataBar Omnidirectional Enable
166 Magellan™ 3450VSi
GS1 DataBar
The symbology family GS1 DataBar™ was formerly known as Reduced Space
Symbology (RSS). For the purpose of simplicity, GS1 DataBar variants are listed
in this manual as “DataBar.”
DataBar Omnidirectional
DataBar Omnidirectional Enable
Enables/disables the ability of the scanner to decode DataBar Omnidirectional
labels.
NOTE
This value-added feature is a factory-program
med option. Con-
tact your dealer for information ab
out upgrading your system to
include this advanced capability.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
04D000(CR)
DataBar Omnidirectional = Disable
04D001(CR)
DataBar Omnidirectional = Enable