DataBar Omnidirectional/EAN-128 Emulation Enter/Exit Programming Mode
Product Reference Guide
167
DataBar Omnidirectional/EAN-128 Emulation
Enables/disables the ability of DataBar Omnidirectional to be transmitted as
EAN-128.
1. To set this feature:
2. Scan the ENTER/EXIT Prog
ramming Mode bar code.
3. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
4. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
DataBar Omnidirectional/EAN-128 Emulation =
Disable
DataBar Omnidirectional/EAN-128 Emulation = Enable
To Next Page
Loading...
