Enter/Exit Programming Mode DataBar Limited Minimum Read
172 Magellan™ 3450VSi
DataBar Limited Minimum Read
This feature specifies the minimum number of consecutive Databar Limited
decodes before is accepted as good read.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
Databar Limited Minimum Read = 1
Databar Limited Minimum Read = 2
Databar Limited Minimum Read = 3
Databar Limited Minimum Read = 4