Datalogic Magellan 3450VSi - Databar Expanded 2 D Component Enable

DataBar Expanded 2D Component Enable Enter/Exit Programming Mode
Product Reference Guide 177
DataBar Expanded 2D Component Enable
When this feature is enabled, the software will not decode an DataBar Expanded
bar code with a 2D component associated with it, and the 2D component will be
discarded.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and
the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
04D700(CR)
DataBar Expanded 2D Component = Disable
04D701(CR)
DataBar Expanded 2D Component = Enable