Enter/Exit Programming Mode DataBar Expanded Length 1
180 Magellan™ 3450VSi
DataBar Expanded Length 1
Length 1 is the minimum label length if in variable length mode, or the first
fixed length if in fixed length mode. Length includes the bar code's data char-
acters only.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the bar code, Set DataBar Expanded Length 1 on page 180 below.
You’ll need to cover any unused bar codes on this and the facing page to
en
sure that the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the Alpha-Numeric Keypa
d in Appendix C
that represent the desired l
abel length. The selectable range for this
option is 00 to 74. Pad all single digit numbers with a leading zero to yield
a two-digit entry (00-74).
4. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Set DataBar Expanded Length 1
DEFAULT
Default setting for this feature = 01
To Next Page
Loading...
