Enter/Exit Programming Mode DataBar Expanded Reverse Retry
182 Magellan™ 3450VSi
DataBar Expanded Reverse Retry
Enables/disables the reading of out of specification labels where the last row
has been printed in reverse.
• When enabled, DataBar Expanded Stacke
d labels that have the last row
incorrectly printed in reverse will be re-decoded.
• When disabled, DataBar Expanded Stacke
d labels that have the last row
incorrectly printed in reverse will not be read.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and
the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
DataBar Expanded Reverse Retry = Disable
DataBar Expanded Reverse Retry = Enable
To Next Page
Loading...
