Enter/Exit Programming Mode Code 39 Length 2
192 Magellan™ 3450VSi
Code 39 Length 2
If Code 39 Length Control is set to Fixed-Length decoding, this feature speci-
fies Code 39 second fixed length. If Code 39 Length Control is set to Variable-
Len
gth decoding, this feature specifies the maximum label length.
NOTE
When in Fixed Length mode, if Length 2 is set t
o the value of 00,
then only Length 1 will apply
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan the bar code, Set Code 39 Length 2 on page 192 below. You’ll need
to cover any unused bar codes on this and the facing pag
e to ensure that
the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the Alpha-Numeric Keypa
d in Appendix C
that represent the desired l
abel length. The selectable range for this
option is 00, no second fixed length, or 01 to 50. Pad all single digit num-
bers with a leading zero to yield a two-digi
t entry (00-50).
4. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Set Code 39 Length 2
DEFAULT
Default setting for this feature = 32 (length = 50)
To Next Page
Loading...
