Code 128 Transmit Function Characters Enter/Exit Programming Mode
Product Reference Guide
199
Code 128 Transmit Function Characters
Enables/disables transmission of Code 128 function characters 1, 2, 3, and 4.
NOTE
Disabled is the recommended setting for all interfaces.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
Code 128 Transmit Function Characters = Disable
Code 128 Transmit Function Characters = Enable
To Next Page
Loading...
