Datalogic Magellan 3450VSi - Expand Code128 to Code 39

Enter/Exit Programming Mode Expand Code128 to Code 39
200 Magellan™ 3450VSi
Expand Code128 to Code 39
Enables/disables expansion of Code 128 labels to Code 39.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
069600(CR)
Expand Code128 to Code 39 = Disable
069601(CR)
Expand Code128 to Code 39 = Enable