Datalogic Magellan 3450VSi - Codabar; Codabar Enable

Codabar Enable Enter/Exit Programming Mode
Product Reference Guide 217
Codabar
Codabar Enable
Enables/disables the ability of the scanner to decode Codabar labels.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
008F00(CR)
Codabar = Disable
008F01(CR)
Codabar = Enable