Datalogic Magellan 3450VSi - Codabar Start Stop Character Transmission

Enter/Exit Programming Mode Codabar Start Stop Character Transmission
218 Magellan™ 3450VSi
Codabar Start Stop Character Transmission
Enables/disables transmission of Codabar start and stop characters.
NOTE
This item is ignored when the advanced feature, Full Label Edit, is
en
abled.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
009300(CR)
Codabar Start Stop Character Transmission = Disable
009301(CR)
Codabar Start Stop Character Transmission = Enable
DEFAULT